Knipex 压接模具, 压接模具, 用于Universal crimping plier - 97 43 200 黑色 97系列

The dies are fixed with a screw.

Interchangeable crimping dies

One tool for almost 1,000 different crimps

Virtually parallel crimping mechanism

Consistently high crimping quality thanks to precision dies and forced locking mechanism (can be unlocked)

Crimping pressure is precisely set at the factory (calibrated), adjustable

Increased force due to lever transmission for less tiring work.

Precision machining to obtain a precise crimp that meets the manufacturer's technical specifications

Over 1000 interchangeable dies.

- To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.

- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

- The setting of the crimping die ranges should also be checked.

- Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil.

Importance of high quality crimping

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure.

同轴连接器的轮廓

用于 RG58 ， 59 ， 62 ， 71 ， 223