Knipex 压接模具, 压接模具, 用于Universal crimping plier - 97 43 200 黑色 97系列

查看所有压接模具
可享批量折扣

小计（1 件）*

¥882.66

(不含税)

¥997.41

(含税)

Add to Basket
选择或输入数量
有库存
  • 8 件将从其他地点发货
**需要更多产品？**输入您需要的数量，点击“查看送货日期”，查看库存和送货信息。
单位
每单位
1 - 4RMB882.66
5 +RMB794.40

* 参考价格

RS 库存编号:
374-4107
Distrelec 货号:
180-54-613
制造商零件编号:
97 49 05
制造商:
Knipex
通过选择一个或多个属性来查找类似产品。
选择全部

品牌

Knipex

产品类型

压接模具

绝缘

绝缘

件数

2

颜色

黑色

切割能力

0.5 to 6 mm²

端口数目

3

子类型

压接模具

使用于

Universal crimping plier - 97 43 200

系列

97

标准/认证

No

不符合

COO (Country of Origin):
DE

Crimp die set 97 49 05


Knipex universal crimping die 97 43 200 / RS 336-8084;For non-insulated open shaft connectors from 0.5mm² to 6mm² (connector width 4.8mm + 6.3mm) - AWG 20 to 10

Dies are machined and engraved with the cable section

The dies are fixed with a screw.

Can be used with the Knipex 97 43 200 / RS 336-8084 universal crimping tool, which offers the following advantages :


Interchangeable crimping dies

One tool for almost 1,000 different crimps

Virtually parallel crimping mechanism

Consistently high crimping quality thanks to precision dies and forced locking mechanism (can be unlocked)

Crimping pressure is precisely set at the factory (calibrated), adjustable

Increased force due to lever transmission for less tiring work

Features and benefits :


Parallel crimping

Precision machining to obtain a precise crimp that meets the manufacturer's technical specifications

Over 1000 interchangeable dies.;Weight: about 40g

Special quality oil-hardened vanadium chrome electric steel

Maintenance tips :


Product maintenance

  • To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.

  • Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

  • The setting of the crimping die ranges should also be checked.

  • Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

    • *Use a light non-mineral oil.

    Importance of high quality crimping

    When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure

    压接 97 49 04/05 和定位辅助 97 49 94


    为系统工具 KNIPEX 97 43 200 进行压接

    为非绝缘、开放式插头连接器

    应用以下来进行卷动压缩
    -97 49 04: 2.8 mm 和 4.8 mm 宽 / 0.1 mm2 到 2.5 mm2
    -97 49 05: 4.8 mm 和 6.3 mm 宽 / 0.5 mm2 到 6 mm2

    可根据要求为正确的正极连接提供定位辅助

    模具均经过镀青铜并以最大电缆截面进行压印