Microchip 以太网开关集成电路, 64引脚 100 Mbps, 4个端口, 2个收发器 3.3 V, 表面安装, QFN
- RS 库存编号:
- 177-4006P
- 制造商零件编号:
- KSZ8864CNXIA
- 制造商:
- Microchip
可享批量折扣
小计 88 件 (按托盘提供)*
¥5,375.92
(不含税)
¥6,074.64
(含税)
有库存
- 242 件将从其他地点发货
**需要更多产品?**输入您需要的数量,点击“查看送货日期”,查看库存和送货信息。
单位 | 每单位 |
|---|---|
| 88 - 172 | RMB61.09 |
| 174 + | RMB59.775 |
* 参考价格
- RS 库存编号:
- 177-4006P
- 制造商零件编号:
- KSZ8864CNXIA
- 制造商:
- Microchip
产品技术参数
产品技术参数资料
法例与合规
产品详细信息
通过选择一个或多个属性来查找类似产品。
选择全部 | 属性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| 产品类型 | 以太网开关集成电路 | |
| 最高数据速率 | 100Mbps | |
| 子类型 | 开关 | |
| 收发器数目 | 2 | |
| 环回模式 | 故障远程诊断, PHY | |
| 端口数目 | 4 | |
| 标准支持 | IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE | |
| 安装类型 | 表面 | |
| 包装类型 | QFN | |
| 最大电源电压 | 3.3V | |
| 引脚数目 | 64 | |
| 最低工作温度 | -40°C | |
| 最高工作温度 | 85°C | |
| 高度 | 0.8mm | |
| 标准/认证 | RoHS | |
| 最低电源电压 | 3.3V | |
| 长度 | 8mm | |
| 宽度 | 8 mm | |
| 汽车标准 | AEC-Q100 3 级标准 | |
| 选择全部 | ||
|---|---|---|
品牌 Microchip | ||
产品类型 以太网开关集成电路 | ||
最高数据速率 100Mbps | ||
子类型 开关 | ||
收发器数目 2 | ||
环回模式 故障远程诊断, PHY | ||
端口数目 4 | ||
标准支持 IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE | ||
安装类型 表面 | ||
包装类型 QFN | ||
最大电源电压 3.3V | ||
引脚数目 64 | ||
最低工作温度 -40°C | ||
最高工作温度 85°C | ||
高度 0.8mm | ||
标准/认证 RoHS | ||
最低电源电压 3.3V | ||
长度 8mm | ||
宽度 8 mm | ||
汽车标准 AEC-Q100 3 级标准 | ||
The KSZ8864RMN is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and smallest package size. It is designed for cost-sensitive 10/100Mbps 4-port switch systems with on-chip termination, lowest-power consumption, and small package to save system cost.
Advanced switch features
Fully managed 4-port 10/100Mbps switch with dual MII/RMII interfaces
VLAN
QoS packet prioritization
rapid spanning tree protocol (RSTP)
Programmable rate limiting at the ingress and egress on a per port and priority basis
Source MAC address filtering for ring support
MIB counters for fully compliant statistics, gathering 34 MIB counters per port
Ultra-low power consumption with integrated line termination
Single 3.3V supply with internal 1.2V LDO controller
Flexible VDDIO support 3.3V, 2.5V, and 1.8V
Industrial temperature range: -40°C to +85°C
Small 64-Pin 8mm x 8mm QFN
