Microchip PHY芯片, 100Mbit/s以太网收发器, QFN封装, 32引脚, 5 x 5 x 0.95mm
- RS 库存编号:
- 177-3529
- 制造商零件编号:
- KSZ8091RNBCA
- 制造商:
- Microchip
可享批量折扣
小计(1 托盘,共 490 件)*
¥6,637.05
(不含税)
¥7,499.94
(含税)
暂时缺货
- 在 2026年1月28日 发货
**需要更多产品?**输入您需要的数量,点击“查看送货日期”,查看库存和送货信息。
单位 | 每单位 | Per Tray* |
|---|---|---|
| 490 - 1960 | RMB13.545 | RMB6,637.05 |
| 2450 + | RMB13.274 | RMB6,504.26 |
* 参考价格
- RS 库存编号:
- 177-3529
- 制造商零件编号:
- KSZ8091RNBCA
- 制造商:
- Microchip
产品技术参数
产品技术参数资料
法例与合规
产品详细信息
通过选择一个或多个属性来查找类似产品。
选择全部 | 属性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| 每片芯片通道数目 | 1 | |
| 典型数据速率 | 100Mbit/s | |
| 电源类型 | 单 | |
| 典型工作电源电压 | 3.3 V | |
| 安装类型 | 贴片 | |
| 封装类型 | QFN | |
| 引脚数目 | 32 | |
| 尺寸 | 5 x 5 x 0.95mm | |
| 最高工作温度 | +70 °C | |
| 最低工作温度 | 0 °C | |
| 选择全部 | ||
|---|---|---|
品牌 Microchip | ||
每片芯片通道数目 1 | ||
典型数据速率 100Mbit/s | ||
电源类型 单 | ||
典型工作电源电压 3.3 V | ||
安装类型 贴片 | ||
封装类型 QFN | ||
引脚数目 32 | ||
尺寸 5 x 5 x 0.95mm | ||
最高工作温度 +70 °C | ||
最低工作温度 0 °C | ||
- COO (Country of Origin):
- US
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
Single-chip 10Base-T/100Base-TX Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
