Microchip, USB5734-I/MR 控制器芯片 null, 1个收发器 5 Gbps, 64引脚, 表面安装 USB 3.0, 3.6 V单电源, SQFN
- RS 库存编号:
- 893-8316
- 制造商零件编号:
- USB5734-I/MR
- 制造商:
- Microchip
可享批量折扣
小计（1 件）*
¥53.69
(不含税)
¥60.67
(含税)
库存信息目前无法访问 - 请稍候查看
单位 | 每单位 |
|---|---|
| 1 - 64 | RMB53.69 |
| 65 - 129 | RMB52.62 |
| 130 + | RMB51.56 |
* 参考价格
- RS 库存编号:
- 893-8316
- 制造商零件编号:
- USB5734-I/MR
- 制造商:
- Microchip
产品技术参数
产品技术参数资料
法例与合规
产品详细信息
通过选择一个或多个属性来查找类似产品。
选择全部 | 属性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| 收发器数目 | 1 | |
| 最高数据速率 | 5Gbps | |
| 产品类型 | 控制器芯片 | |
| USB 规格 | USB 2.0 | |
| 子类型 | 控制器 | |
| 电源类型 | 单 | |
| ESD 保护 | 是 | |
| 最低电源电压 | 1.2V | |
| 最大电源电压 | 3.6V | |
| 安装类型 | 表面 | |
| 包装类型 | SQFN | |
| 引脚数目 | 64 | |
| 最低工作温度 | -40°C | |
| 双电源电压 | 3.3V | |
| 支持的协议 | USB 3.0 | |
| 最高工作温度 | 85°C | |
| 高度 | 1mm | |
| 长度 | 9mm | |
| 宽度 | 9 mm | |
| 标准/认证 | No | |
| 系列 | USB5734 | |
| 汽车标准 | 否 | |
| 选择全部 | ||
|---|---|---|
品牌 Microchip | ||
收发器数目 1 | ||
最高数据速率 5Gbps | ||
产品类型 控制器芯片 | ||
USB 规格 USB 2.0 | ||
子类型 控制器 | ||
电源类型 单 | ||
ESD 保护 是 | ||
最低电源电压 1.2V | ||
最大电源电压 3.6V | ||
安装类型 表面 | ||
包装类型 SQFN | ||
引脚数目 64 | ||
最低工作温度 -40°C | ||
双电源电压 3.3V | ||
支持的协议 USB 3.0 | ||
最高工作温度 85°C | ||
高度 1mm | ||
长度 9mm | ||
宽度 9 mm | ||
标准/认证 No | ||
系列 USB5734 | ||
汽车标准 否 | ||
USB5734 USB 3.0 Hub Controllers
From Microchip the USB5734 is a 3.0 compliant (also known as USB 3.1 Gen 1) and supports all the defined USB speeds up to the 5 Gbps SuperSpeed (SS) data rate on all enabled downstream ports. The device integrates a USB 2.0 controller to decouple SuperSpeed data from slower USB 2.0 traffic to avoid bottlenecks slower USB 2.0 traffic can create.
The USB5734 integrates functions that would typically be associated with a separate MCU or processor; as such Microchip classifies this device as a ’Smart Hub’. For example the device can communicate to peripherals via I2C, SPI, GPIOs or UART in addition to USB. Also a downstream device can take control of the host system by swapping roles to become the host port, with the Smart Hub switching between two different hosts if required.
特点
Four downstream USB 3.0 (USB 3.1 Gen1)/2.0 ports
Integrated Hub Feature Controller (HFC) enabling I/O bridging and FlexConnect
I/O Bridging: Host communication to external peripherals - USB to I2C/UART/SPI/GPIO
FlexConnect: Host port swapping and switching to downstream devices
Battery Charging: USB-IF revision 1.2 support on downstream ports (DCP, CDP, SDP)
Simultaneous data transfer for 2500 mA of high speed charging
Port Configuration Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable
Application Straps: Predefined configuration of GPIOs for specific Use Cases including Mixed Mode, FlexConnect Mode, Port Speed mode, Port BC Mode and UART Mode.
ProTouch2: Configuration tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM
Manufacturing line programming tool and field update capabilities
USB Link Power Management (LPM) support
IETF RFC 4122 compliant 128-bit UUID
Compatible with Microsoft® Windows® 8/8.1 and other major OS’s