Knipex 压接工具, 用于D Sub HD 20 Contacts, D Sub HDE Contacts 0.5 to 6 mm²
- RS 库存编号:
- 305-324
- Distrelec 货号:
- 110-83-908
- 制造商零件编号:
- 97 54 24
- 制造商:
- Knipex
可享批量折扣
小计（1 件）*
¥3,636.46
(不含税)
¥4,109.20
(含税)
有库存
- 2 件将从其他地点发货
**需要更多产品？**输入您需要的数量，点击“查看送货日期”，查看库存和送货信息。
单位 | 每单位 |
|---|---|
| 1 - 4 | RMB3,636.46 |
| 5 + | RMB3,563.73 |
* 参考价格
- RS 库存编号:
- 305-324
- Distrelec 货号:
- 110-83-908
- 制造商零件编号:
- 97 54 24
- 制造商:
- Knipex
产品技术参数
产品技术参数资料
法例与合规
产品详细信息
通过选择一个或多个属性来查找类似产品。
选择全部 | 属性 | 值 |
|---|---|---|
| 品牌 | Knipex | |
| 子类型 | 压接工具 | |
| 产品类型 | 压接工具 | |
| 使用于 | D Sub HD 20 Contacts, D Sub HDE Contacts | |
| 把手类型 | 舒适把手 | |
| 切割能力 | 0.5 to 6 mm² | |
| 高度安全 | 常开 | |
| 总体长度 | 190mm | |
| 标准/认证 | REACH contains SVHC | |
| 最大电线尺寸 AWG | 20 | |
| 最小电线尺寸 mm² | 0.03 | |
| 最大电线尺寸 mm² | 0.56 | |
| 最小电线尺寸 AWG | 32 | |
| 选择全部 | ||
|---|---|---|
品牌 Knipex | ||
子类型 压接工具 | ||
产品类型 压接工具 | ||
使用于 D Sub HD 20 Contacts, D Sub HDE Contacts | ||
把手类型 舒适把手 | ||
切割能力 0.5 to 6 mm² | ||
高度安全 常开 | ||
总体长度 190mm | ||
标准/认证 REACH contains SVHC | ||
最大电线尺寸 AWG 20 | ||
最小电线尺寸 mm² 0.03 | ||
最大电线尺寸 mm² 0.56 | ||
最小电线尺寸 AWG 32 | ||
- COO (Country of Origin):
- DE
Micro-connector crimping pliers with parallel crimping
Features and benefits
- Parallel crimping motion, to meet the particularly stringent requirements of micro-connectors
- Amplified force due to toggle gearing for less tiring work
- High-quality repeat crimping thanks to the integrated lock (automatic release mechanism)
- Crimping pressure precisely defined (calibrated) at the factory, also adjustable
- Optimum force transmission through lever for fatigue-reducing operation
- Low weight
- Compact design
- Ergonomic handles
- Capacities mm² / AWG : for D-Sub; HD 20; HDE micro connectors - Connectors from 0.03 to 0.56 mm² - AWG 32 to 20
- Material: Special grade chrome vanadium electrical steel, oil quenched
Typical applications
Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop
Product Maintenance
- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil