Level monitoring and control of conductive liquids and powders, e.g. maximum and minimum fill level, protection against overfilling and dry running
Monitoring and control of the mix ratio for conductive liquids
General resistance monitoring, e.g. recording temperature limits with PTC (device to IEG 255, VDE 0435 section 303)
3 electrode connections for 2-point and 1-point level control
The metering circuit galvanically isolated from the mains is immune from high levels of interference
Max. lead length to the electrodes: 1500 m
Wide setting range: 2 → 450 kΩ which enables differentiation between liquid and foam
Adjustable response and fallback delay: 0.2 → 20 s
Programmable for working current principle (without bridge) or rest current principle (X1-X2 and/or X1-COM bridge)
2 LEDs to indicate operating readiness and contact position
1 changer
Overall width 22.5 mm, protection class IP40
液位继电器用于监测导电液体的液位,且提供向上/向下、最小、最大和灌注/排空变型。液位继电器可直接安装且使用安全。
液位继电器(导电液位传感器)适用于各种应用,包括污水管理和腐蚀性液体介质的检测和控制,特别设计用于提供:
监控和控制液位
防止泵空运转
可检测系统中是否存在液体泄漏
控制介质混合比例
控制液位
属性 | 数值 |
---|---|
输入数目 | 1 |
安装样式 | DIN导轨 |
探头电压 | 10V 交流 |
电源电压 | 24 V 直流 |
总体长度 | 82mm |
总体宽度 | 22.5mm |
总体深度 | 99mm |
最低工作温度 | -20°C |
最高工作温度 | +60°C |