From RS Pro a range of high-quality polycarbonate translucent solid plastic sheets available in a range of sizes and thicknesses.
Solid plastic sheets are sheets of strong durable plastic or plastic like materials which are cut to size and sold in a wide range of sizes and thickness. These hard plastic sheets, once purchased, can then be cut or machined into components for the fabrication of products for use in a wide range of industries. Different plastics have different properties which lend them for use in specific applications
Polycarbonate is also known by the abbreviation PC and is a transparent amorphous engineering thermoplastic. Amorphous is the term given to plastics that gradually soften rather than go from a solid to a liquid when heated. Having this property means that this plastic is less likely to warp when subjected to high temperatures and easy to mould and thermoform. Polycarbonate is very tough with excellent impact resistance but also lightweight, very pliable and can be moulded and formed at room temperature without cracking or breaking. This clear sheet plastic is often used as a substitute for sheet metal if transparency or a non-conductive material is needed. One of the drawbacks with PC plastic sheet is its low scratch resistance so an additional hard coating needs to be applied where a scratch free surface is required
极佳的抗冲击强度
极佳的尺寸稳定性,在温度和湿度发生变化时可保持其原始尺寸
在较宽的温度范围内具有良好的刚度
可弯曲,具有柔性
中等的耐化学性和低耐溶剂性
半透明
良好的耐热性
良好的绝缘性
良好的可加工性
易抛光,可焊接,并可用胶水粘合
聚碳酸酯塑料板具有独特的性质,尤其具有韧性和柔性,因此适用于各种行业。这些行业包括电子、半导体、汽车、食品、医疗和建筑行业。PC 是一种用途非常广泛的塑料,非常适合用于要求透明和高抗冲击性的应用。这种透明且耐用的实心塑料板与玻璃相比质量更轻,这意味着它可以在一些应用中取代玻璃
医疗设备
电子元件
汽车组件
电气箱和盖子
数字磁盘(CD、DVD 和蓝光光碟)
机器护罩和保护屏幕
标志和显示屏
选择什么工具用于切割此塑料,具体取决于被切割板的厚度。较薄的塑料板可使用锋利的美工刀进行切割。较厚的板可使用不同类型的锯系列进行切割,例如细齿手锯或钢锯或电动台锯、带锯、圆锯或竖锯。锯片上的齿应进行良好修磨,并保持间隔均匀,高度和形状一致,以避免导致塑料破裂或破损。锯割操作导致的摩擦会导致锯片发热,这可能会熔化塑料,因此建议使用不熔化的锯片。如果使用常规锯片,可在切割期间暂停,使锯片得到冷却。
This polycarbonate sheet is engineering grade material and is not UV resistant
属性 | 数值 |
---|---|
颜色 | 透明 |
式样 | 全高 |
长度 | 305mm |
宽度 | 625mm |
厚度 | 2mm |
材料 | PC |
层压 | 否 |
密度 | 1.2g/cm³ |
拉伸强度 | 62 MPa |
可燃性等级 | UL 94 |
吸水率 | 0.35% |
最高工作温度 | +120°C |